Inertial Measurement Sensor
IMS-LTD (options)
The IMS is a complete inertial gyro system. It features three angular rate gyros, three accelerometers and a fluxgate magnetometer. The IMS has the capabilities of an AHRS and DMS combined. It has full attitude outputs - bank,elevation and magnetic heading along with triaxial leveled accelerometer data. This allows the IMS to be used in awide range of applications especially research and automotive testing applications.
Applications:
IMS is used in automotive testing, pipeline maintenance telemetry, and vehicle dynamics applications.
Features:
|
• Solid State, Strapdown System |
|
• Six Accelerometer Outputs |
|
• Low Cost, Low Power |
|
• Rugged, High Reliability |
|
• Vibration Resistant |
|
• Analog and RS-232 Serial Outputs |
|
• One Year Limited Warranty |
|
• Engineering Support |
Inertial Gyro Sensor
|
|
Rate Range |
±100°/s |
Rate Accuracy |
±2% Full Scale |
Rate Resolution |
<0.05°/sec. |
Acceleration Range |
±10 g |
Acceleration Accuracy/Bias |
±0.5% Full Scale |
Acceleration Resolution |
<5 mg |
Angle Accuracy |
0.3° Static, 2% Dynamic** |
Pitch Range |
±75° |
Frequency Response |
DC-25Hz |
Sensor Alignment |
<0.2° Error-All Sensors |
Velocity Input |
±400 kph (±10V) velocity (+forward) |
Digital Output |
RS-232 serial communications (adjustable baud rate) |
Shock Resistance |
500 g |
Weight |
<4 lbs. |
Power |
+10VDC to +30VDC, <4.5 Watts |
Size |
See Drawing |
Temperature Range |
-30°C to +65°C |
* Subject to change without notice. |
|
** Assumes accurate velocity data. |
|
Copyright 2008 Watson Industries Ltd ©